Jaw Crushers

<strong>Jaw</strong> <strong>Crushers</strong>JC1000 • JC2000 • JC2500 • JC3000 • JC5000Superior Primary<strong>Jaw</strong> <strong>Crushers</strong> engineeredfor rapid reductionof large particles<strong>Jaw</strong> <strong>Crushers</strong> for CoarsePrimary Crushing andMid Range Primary CrushingEssa <strong>Jaw</strong> <strong>Crushers</strong> are well proven singletoggle, high reduction <strong>Jaw</strong> <strong>Crushers</strong>.The crushing capacity and the end-finenessof the sample material depends on the typeof crusher and on the breaking characteristicsof the sample material.Essa <strong>Crushers</strong> are designed for laboratoryapplications and for operating environmentsand accepts soft to hard ores, drillcores, rocks, alloys, slags, soils, ceramicsand similar hard and brittle materials.

Essa <strong>Jaw</strong> <strong>Crushers</strong>JC1000 / JC2000 / JC2500 / JC3000 / JC5000JC1000JC5000JC2000JC2500JC3000Selection Guide Pre-CrushingModel JC1000 JC2000 JC2500 JC3000 JC5000Feed Size

Features and benefitsSelection of <strong>Jaw</strong> Plates»»»»»»»»»»High througput up to 15 tons andhigh reduction rateHigh end fineness D90 < 1,6mmAjustable gap width setting<strong>Jaw</strong> Plates made of a rangeof materialsSafety Inlet Hopper withAuto Lift FunctionEasy to access crushing chamberIntegration versions availableCrusher / Sample DividerCombo availableCertified safety (CE conform)Combo with Disc PulverizerDP200 available<strong>Jaw</strong> Plates and Side Liners for ESSA <strong>Jaw</strong> <strong>Crushers</strong> are available in a rangeof different materials:Manganese steel / Stainless Steel / Heavy Metal Free Steel /Tungsten CarbideAll Wear Parts can be replaced easily or the <strong>Jaw</strong> Crusher can be orderedto be delivered with the desired <strong>Jaw</strong> Plates and Side Liners.JC 2000 serrated<strong>Jaw</strong> PlatesESSA <strong>Jaw</strong> <strong>Crushers</strong> as Integration versionfor online operation in a sample preparation towerEssa <strong>Jaw</strong> <strong>Crushers</strong> are available as well to be integrated in asample tower . This Crusher are designed to operate continuouslyfor on line crushing operations in a sample tower. Theintegration crushers are supplied without the In feed Hopper andwithout the Motor Protections Switch. The Motor of the Crusherwill be supplied according to the customer’s requirements.PRIMARY CRUSHERPRIMARY SAMPLERSECONDARYCRUSHERSECONDARYSAMPLERREJECTCONVEYORJC2000 Integration versionLINEAR SAMPLE COLLECTOR

Disc Mill Pulverizer Auto Batch Mill Micron Mill Hammer Millwww.laarmann.euYour local contactLaarmann Group B.V.Jules Breukersstraat 96041 BP RoermondTHE NETHERLANDSt: +31 475 470 217f: +31 472 470 242e: gla@laarmann.eu