Intl Titan Tines Catalog - Toro

TITAN 

Tines 

TINES FULL-LINE CATALOG

Table Of Contents 

GENUINE TORO PARTS 

TINES FULL-LINE CATALOG 

1 

2-3 

4 

5 

6 

7 

8-9 

10-11 

12 

13 

14 

15 

16 

17 

18 

19 

20 

21 

22 

23 

24 

WHY AERATE? 

PARTS PLEDGE 

TITAN TINE ADVANTAGE 

TINE CHOICES 

TINE TERMINOLOGY 

MEASUREMENT GUIDE 

TINE SELECTION GUIDE (METRIC) 

TINE SELECTION GUIDE 

TITAN TINES 

TITAN QUAD 

TITAN MAX QUAD 

TITAN HOLLOW 

TITAN MAX HOLLOW 

TITAN SIDE-EJECT 

TITAN MAX SIDE-EJECT 

TITAN FAIRWAY 

TITAN MAX FAIRWAY 

TITAN SOLID NEEDLE AND SOLID ROUND 

TITAN SOLID ROUND AND SPOON 

TITAN SOLID CROSS 

TITAN SOLID SLICING 

CLASSIC TORO ® FAIRWAY TINES

Why Aerate? 

The Driving Force Behind 

Better Turf: Aeration. 

Aeration is an important part of maintaining a 

healthy course and general ground areas. It 

relieves compaction, allows water and gas to 

infiltrate the soil, and mixes plant material with 

the soil to aid in the breakdown of organic 

matter. Here are the proven successful ways to 

aerate and Toro ® has the perfect tine to match 

each of these aeration choices: 

• Core aerification, which is the most versatile 

cultivation method, meets several conditions at 

once. It’s the best way to control buildup of undecomposed 

organic matter in the root zone in 

sand-based soils. The removal of cores following 

aerification and replacing them with sand top 

dressing is the best method of keeping root zone 

organic matter within healthy limits. 

Toro ® Titan tines meet all of these coring 

needs. With thinner walls for improved hole 

quality, optimized end taper for improved core 

pulling, and a slower wear rate, Titan tines are 

the perfect choice. 

• Solid tine aerification, which provides enhanced 

gas movement between the root zone and the 

atmosphere is another method of aerification. 

Solid tines cause less injury to the turf, which is 

perfect for periods of high usage. It consists of 

driving a hole into the ground, compacting the 

soil temporarily, which fills in slowly over time, 

but limits the disruption to the surface area. 

Titan tines offer more sizes and longer lengths. 

They also provide tips designed to stay sharper, 

longer. 

• Slicing or Cross aerification, which offers 

treatments causing minimal injury for more 

sensitive times of the year. Titan tines offer long 

life with use of alloy steel and a unique 

manufacturing process, longer lengths, and tips 

with a small 1.6 mm (1/16") flat area to 

improve handling comfort. 

Aeration is the key to keeping your course and 

grounds looking great. It’s important to aerate as 

often as possible especially when it comes to high 

traffic areas and with Titan tines on your team 

you’ll know you have the best equipment to meet 

all of your aeration needs successfully. 

www.toro.com 

1

Parts Pledge 

The Toro® 

Parts Pledge 

For years Toro ® has built its reputation on 

unmatched quality and commitment to very 

exacting standards—including all of its genuine 

Toro parts. Will-fit manufacturers don’t have the 

same level of commitment to uphold so they 

often end up cutting corners on their parts to 

reduce costs. 

Our Parts Pledge: 

• Toro supports Toro distributors with same day 

shipments 

• Huge inventory and attractive pricing 

• Ensure form, fit, and function, equal to or 

better than original 

• Ship back-orders same day received 

• Offer friendly, helpful service 

• Provide hassle-free warranty replacement for 

defective parts 

• Committed to high-quality standards 

Receive the highest quality 

Toro ® Titan tines at prices 

close to or better than 

competitor prices. 

2 www.toro.com

Parts Pledge 


Genuine Toro ® 

Quality 

Our tines offer the same superior quality that our 

other products provide. Toro ® manufactures and 

stocks only the best tines. We supply the highestquality 

tines for your equipment and each tine 

meets specific standards—standards that are 

higher than the industry norms! With longer-life 

steel, thinner walls for improved hole quality, and 

a slower wear rate that provides more consistent 

aeration depth. Our customers expect Toro tines 

to perform every day. That’s why our tines must 

provide exceptional performance the first time, 

and every time they’re used. That isn’t the 

exception—it’s the main part of the complete 

Toro commitment to aeration quality. 

Competitive Prices 

Don’t take chances with low prices, that leave you 

with poor quality and results. Toro offers an 

everyday low price comparable to competitor 

prices, with quality that exceeds the competition. 

Let Toro guide you to increased productivity and 

better performance—all at a great price! 

www.toro.com 

3

TITAN Tine Advantage 

Proper Equipment 

Achieves Easier Results. 

New TITAN Tines Offer: 

• More Choices 

- Over 100 new tines provide multiple aeration choices 

- Available in Quad, Hollow, Side-Eject, Shaped or Solid 

- Titan Max designed with long lasting carbide tip 

• Higher Productivity 

- Standard Titan tines last approximately 2-3 times longer than previous Toro tine version 

- Titan Max lasts 18 holes or more! 

• Better Performance 

- Thin wall design allows for maximum core pulling and superior hole quality 

• Optimized core removes more thatch for maximum top dressing 

• Superior hole quality improves recovery time and maintains playability 

• Speeds up playability 

• Increased Durability 

- Tough design maintains consistent aerator depth and reduces costly changeouts 

- Unique manufacturing process allows for thinner wall tine while maximizing durability 

- Advanced technology creates thinner wall tine while improving performance 

- Carbide tip constructed of tough tungsten carbide blend 

- Durable brazed tip joint for strong bond and resistance to separation and breakage 

4 www.toro.com

TITAN Choices 


Titan Quad Titan Max Quad Titan Hollow Titan Max Hollow 

Titan Side-Eject Titan Max Side-Eject Titan Fairway Titan Max Fairway 

Titan Solid 

Quad Mount 

Titan Solid 

1.9 cm (3/4") Mount 

Titan Cross 

Quad Mount 

Titan Cross 

1.9 cm (3/4") Mount 

Titan Slicing 

Quad Mount 

Titan Slicing 

1.9 cm (3/4") Mount 

See complete 

product specifications on 

pages 12-24. 

www.toro.com 

5

Tine Terminology 

Achieving The Right 

Solution Requires A New 

Way Of Thinking. 

As the technology of an industry advances, it’s 

important to communicate the information in an 

easy to understand way. Currently the outside 

diameter of the cutting tip is used to set the size 

of the tine. This leads to confusion as to the core 

diameter after aeration due to different wall 

thicknesses. Toro ® has developed a new practice to 

size tines. The new size configuration not only 

uses the ID of the cutting tip (core diameter) it 

also has a repeated step in diameter across all 

coring tines. 

For example, a “200” tine is 0.5 cm (0.200 inch) 

inside diameter and a “300” tine is 0.8 cm (0.300 

inch) inside diameter. The core size is now listed 

in 200, 300, 400, 500, and 600. This makes 

sizing very easy. The solid tines are done in a 

similar way with the size referring to the outside 

diameter rather than the core size. 

To determine the size of a new Titan tine you 

need to use, compared to what you’re currently 

using, simply reference the chart below: 

Old New Titan Core Core 

Practice Tine Size Diameter Area 

.6 cm (1/4") 200 .5 cm (0.200) 0.20 cm 2 (0.031 sq-in) 

.9 cm (3/8") 300 .8 cm (0.300) 0.50 cm 2 (0.071 sq-in) 

1.2 cm (1/2") 400 1.0 cm (0.400) 0.79 cm 2 (0.126 sq-in) 

1.6 cm (5/8") 500 1.3 cm (0.500) 1.33 cm 2 (0.196 sq-in) 

1.9 cm (3/4") 600 1.5 cm (0.600) 1.77 cm 2 (0.283 sq-in) 

Example: 

The tine listed below is a Titan Max Quad 200 tine. 

The ID (core diameter) is .200 and under the old 

practice would have been known as 1/4" tine. 

Part Number Description Mount Length ID OD Wall 

Thickness 

108-9112 Titan Max Quad 1.0 cm (3/8") 11.4 cm (4.50") .5 cm (0.200) 1.0 cm (0.380) 1.3 mm (0.052") 

6 www.toro.com

Measurement Guide 


Selection & Measurement 

Mount Size 

Standard Sizes 

0.6 cm (1/4″) 

1.0 cm (3/8″) 

Side-Eject 

1.3 cm (1/2″) 

Length 

1.6 cm (5/8″) 

1.9 cm (3/4″) 

Wall Thickness 

2.2 cm (7/8″) 

Tine OD 

Carbide Tip 

2.5 cm (1″) 

Core Diameter (ID) 

Titan tines fit all current and late model Toro ® aerators. 

Standard mount size fits most competitor equipment. Check mounting size to ensure compatibility. 

*Durability tests were conducted in U.S. soil conditions. 

www.toro.com 

7

Tine Selection Guide 

DETERMINE THE TOTAL SURFACE AREA AFFECTED 

AND AMOUNT OF MATERIAL REMOVED. 

STEP ONE 

The first step is to find holes per square meter. 

If you know your lateral and forward spacing, find holes 

per square meter on the Holes Per Square Meter table. 

Example: 

Lateral Spacing = 5.1 cm 

Forward Spacing = 5.1 cm 

Holes Per Square Meter = 384.5 

If you are not sure of your forward and lateral spacing, but know your aerator model number 

go to the Pick A Model table and pick your spacing options. This table will also help you 

determine the proper turf holder based on your tine configuration. 

STEP TWO 

To determine the total surface area affected and volume of soil removed when aerating, 

reference the Percent Surface Area Affected/Volume Removed table. All you need to know 

is holes per square meter, core diameter (ID), and the depth* at which you are aerating. 

Example: 

Holes Per Square Meter = 384.5 

Core Diameter = 0.8 cm 

Depth = 7.6 cm 

Percent Surface Area Affected = 1.79% 

Volume Removed = 0.133 cubicmeters per 100 square meters 

* Tine depth can vary based on machine set-up. 

8 www.toro.com

Helping Golf Course 

Superintendents 

And Groundskeepers Excel. 

When you're looking to keep your golf 

course and grounds in top shape, you need 

a system that helps you quickly choose the 

right treatment for your turf needs. 

Aeration is the key and the tine selection 

chart offers you fast answers that convey 

exactly what you need to do to keep your 

turf looking great. 

The tine selection guide makes it easy to 

choose and understand the right solution 

for your golf course and ground needs! 

The benefits of using the tine selection 

chart include: 

• Speed and ease of use 

• Selection of proper turf holder 

based on aerator and tine 

configuration needs. 

• Quickly tells you the 

amount of soil removed 

and the percentage of 

surface area affected



Model Configuration 

STEP ONE 

Holes Per Square Meter 

Lateral Spacing 

(cm) 

All Models 

Holes per Square Meter 

Forward Spacing (cm) 

2.5 3.8 5.1 6.4 7.6 8.9 10.2 11.4 15.2 

3.0 1333.3 877.2 653.6 520.8 438.6 374.5 326.8 292.4 - 

4.1 - - - 381.1 - - - - - 

5.1 784.3 516.0 384.5 306.4 258.0 - - - - 

5.7 - - - 274.1 - - - - - 

6.1 655.7 431.4 321.4 256.1 215.7 184.2 160.7 143.8 - 

6.4 625.0 411.2 306.4 244.1 205.6 - - - - 

8.1 493.8 324.9 242.1 192.9 162.4 138.7 121.0 108.3 - 

8.9 - - - - 147.8 - - - - 

13.3 - - - - - - - - 49.5 

Pick A Model 

Lateral Forward Spacing 

Product Description No. Spacing Options (cm) Turf Holders 

(cm) 

PN Qty PN Qty 

ProCore 648 Needle Tine Head 09221 4.1 3.8, 5.1, 6.4 105-1110 2 105-1111 1 

Model 09200 Quad Tine Head 09222 4.1 6.4 105-1110 2 105-1111 1 

3 Tine, 1.9 cm (3/4") Mount Head 09223 6.4 3.8, 5.1, 6.4, 7.6 105-1106 2 105-1107 1 

4 Tine, 1.9 cm (3/4") Mount Head 09224 5.1 3.8, 5.1, 6.4, 7.6 105-1104 2 105-1105 1 

3 Tine, 2.2 cm (7/8") Mount Head 09226 6.4 5.1, 6.4, 7.6 105-1106 2 105-1107 1 

660 880 660 880 

ProCore 660/880 Needle Tine Head 660/880 09720 3.0 3.8, 5.1, 6.4 105-5418 6 - 100-5415 1 - 

Models 09701, Needle Tine Head 660/880 09720 3.0 3.8, 5.1, 6.4 105-5419 - 7 - - 

09702 Quad Tine Head 09721 3.0 3.8, 5.1, 6.4 100-5420 1 5 100-5421 8 4 

3 Tine, 1.9 cm (3/4") Mount Head 09722 8.1 5.1, 6.4, 7.6, 8.9, 10.2, 11.4 100-5414 2 5 100-5415 3 - 

4 Tine, 1.9 cm (3/4") Mount Head 09723 6.1 5.1, 6.4, 7.6, 8.9, 10.2, 11.4 100-5416 5 1 100-5417 - 4 

3 Tine, 2.2 cm (7/8") Mount Head 09733 8.1 5.1, 6.4, 7.6, 8.9, 10.2, 11.4 100-5414 2 5 100-5415 3 - 

4 Tine, 2.2 cm (7/8") Mount Head 09734 6.1 5.1, 6.4, 7.6, 8.9, 10.2, 11.4 100-5416 5 1 100-5417 - 4 

Toro Greens 

Aerator 

Models 09110, 5.7 6.4 72-4660 RH 1 

09120 72-4680 Ctr 1 

72-4640 LH 1 

Toro Fairway 

Aerator 8.9 7.6, 15.2 70-9440 3 

Models 09500, 13.3 7.6, 15.2 70-9430 3 

09501, 09502 

Percent Of Surface Area Affected And Amount Of Volume Removed 

STEP TWO Percent Of Surface Area Affected 

Volume Removed, Cubic Meters Per 100 Square Meter Risk Of Turf Damage Higher Risk Of Turf Damage 

Determine Surface Area Affected 

Holes Per Square Meter 

Core 

Diameter (cm) 49.5 108.3 121.0 138.7 143.8 147.8 162.4 184.2 192.9 205.6 215.7 242.1 244.1 256.1 274.1 292.4 306.4 321.4 374.5 384.5 411.2 431.4 493.8 516.0 625.0 655.7 784.3 877.2 1333.3 

Depth* 

0.5 0.10% 0.22% 0.25% 0.28% 0.29% 0.30% 0.33% 0.37% 0.39% 0.42% 0.44% 0.49% 0.49% 0.52% 0.56% 0.59% 0.62% 0.65% 0.76% 0.78% 0.83% 0.87% 1.00% 1.05% 1.27% 1.33% 1.59% 1.78% 2.70% 

3.8 0.004 0.008 0.009 0.011 0.011 0.011 0.013 0.014 0.015 0.016 0.017 0.019 0.019 0.020 0.021 0.023 0.024 0.025 0.029 0.030 0.032 0.033 0.038 0.040 0.048 0.051 0.060 0.068 0.103 

5.1 0.005 0.011 1.04 0.014 0.015 0.015 0.017 0.019 0.020 0.021 0.022 0.025 0.025 0.026 0.028 0.030 0.032 0.033 0.039 0.040 0.043 0.045 0.051 0.053 0.065 0.068 0.081 0.091 0.138 

6.4 0.006 0.014 1.31 0.018 0.019 0.019 0.021 0.024 0.025 0.027 0.028 0.031 0.032 0.033 0.036 0.038 0.040 0.042 0.049 0.050 0.053 0.056 0.064 0.067 0.081 0.085 0.102 0.114 0.173 

7.6 0.008 0.017 1.55 0.021 0.022 0.023 0.025 0.028 0.030 0.032 0.033 0.037 0.038 0.039 0.042 0.045 0.047 0.050 0.058 0.059 0.063 0.066 0.076 0.079 0.096 0.101 0.121 0.135 0.205 

8.9 0.009 0.020 1.82 0.025 0.026 0.027 0.029 0.033 0.035 0.037 0.039 0.044 0.044 0.046 0.049 0.053 0.055 0.058 0.068 0.069 0.074 0.078 0.089 0.093 0.113 0.118 0.141 0.158 0.241 

10.2 0.010 0.022 2.09 0.029 0.030 0.031 0.034 0.038 0.040 0.043 0.045 0.050 0.050 0.053 0.057 0.060 0.063 0.066 0.077 0.079 0.085 0.089 0.102 0.107 0.129 0.136 0.162 0.181 0.276 

0.8 0.23% 0.49% 0.55% 0.63% 0.66% 0.67% 0.74% 0.84% 0.88% 0.94% 0.98% 1.10% 1.11% 1.17% 1.25% 1.33% 1.40% 1.47% 1.71% 1.75% 1.88% 1.97% 2.25% 2.35% 2.85% 2.99% 3.58% 4.00% 6.08% 

3.8 0.009 0.019 0.021 0.024 0.025 0.026 0.028 0.032 0.033 0.036 0.037 0.042 0.042 0.044 0.048 0.051 0.053 0.056 0.065 0.067 0.071 0.075 0.086 0.089 0.108 0.114 0.136 0.152 0.231 

5.1 0.012 0.025 0.028 0.032 0.033 0.034 0.038 0.043 0.045 0.048 0.050 0.056 0.057 0.060 0.064 0.068 0.071 0.075 0.087 0.089 0.096 0.100 0.115 0.120 0.145 0.153 0.182 0.204 0.310 

6.4 0.014 0.032 0.035 0.040 0.042 0.043 0.047 0.054 0.056 0.060 0.063 0.071 0.071 0.075 0.080 0.085 0.089 0.094 0.109 0.112 0.120 0.126 0.144 0.151 0.182 0.191 0.229 0.256 0.389 

7.6 0.017 0.038 0.042 0.048 0.050 0.051 0.056 0.064 0.067 0.071 0.075 0.084 0.085 0.089 0.095 0.101 0.106 0.111 0.130 0.133 0.143 0.150 0.171 0.179 0.217 0.227 0.272 0.304 0.462 

8.9 0.020 0.044 0.049 0.056 0.058 0.060 0.066 0.075 0.078 0.083 0.088 0.098 0.099 0.104 0.111 0.119 0.124 0.130 0.152 0.156 0.167 0.175 0.200 0.209 0.254 0.266 0.318 0.356 0.541 

10.2 0.023 0.050 0.056 0.065 0.067 0.069 0.076 0.086 0.090 0.096 0.100 0.113 0.114 0.119 0.128 0.136 0.143 0.150 0.174 0.179 0.191 0.201 0.230 0.240 0.291 0.305 0.365 0.408 0.620 

1.0 0.40% 0.88% 0.98% 1.12% 1.17% 1.20% 1.32% 1.49% 1.56% 1.67% 1.75% 1.96% 1.98% 2.08% 2.22% 2.37% 2.48% 2.61% 3.04% 3.12% 3.33% 3.50% 4.00% 4.18% 5.07% 5.32% 6.36% 7.11% 10.81% 

3.8 0.015 0.033 0.037 0.043 0.044 0.046 0.050 0.057 0.059 0.063 0.066 0.075 0.075 0.079 0.084 0.090 0.094 0.099 0.115 0.118 0.127 0.133 0.152 0.159 0.193 0.202 0.242 0.270 0.411 

5.1 0.020 0.045 0.050 0.057 0.059 0.061 0.067 0.076 0.080 0.085 0.089 0.100 0.101 0.106 0.113 0.121 0.127 0.133 0.155 0.159 0.170 0.178 0.204 0.213 0.258 0.271 0.324 0.363 0.551 

6.4 0.026 0.056 0.063 0.072 0.075 0.077 0.084 0.096 0.100 0.107 0.112 0.126 0.127 0.133 0.142 0.152 0.159 0.167 0.194 0.199 0.213 0.224 0.256 0.268 0.324 0.340 0.407 0.455 0.692 

7.6 0.030 0.067 0.075 0.085 0.089 0.091 0.100 0.113 0.119 0.127 0.133 0.149 0.150 0.158 0.169 0.180 0.189 0.198 0.231 0.237 0.253 0.266 0.304 0.318 0.385 0.404 0.483 0.540 0.822 

8.9 0.036 0.078 0.087 0.100 0.104 0.107 0.117 0.133 0.139 0.148 0.156 0.175 0.176 0.185 0.198 0.211 0.221 0.232 0.270 0.277 0.297 0.311 0.356 0.372 0.451 0.473 0.566 0.633 0.962 

10.2 0.041 0.090 0.100 0.115 0.119 0.122 0.134 0.152 0.160 0.170 0.178 0.200 0.202 0.212 0.227 0.242 0.253 0.266 0.310 0.318 0.340 0.357 0.408 0.427 0.517 0.542 0.549 0.725 1.103 

1.3 0.63% 1.37% 1.53% 1.76% 1.82% 1.87% 2.06% 2.33% 2.44% 2.60% 2.73% 3.07% 3.09% 3.24% 3.47% 3.70% 3.88% 4.07% 4.74% 4.87% 5.21% 5.46% 6.26% 6.54% 7.92% 8.31% 9.94% 11.11% 16.89% 

3.8 0.024 0.052 0.058 0.067 0.069 0.071 0.078 0.089 0.093 0.099 0.104 0.117 0.118 0.123 0.132 0.141 0.147 0.155 0.180 0.185 0.198 0.208 0.238 0.248 0.301 0.316 0.378 0.422 0.642 

5.1 0.032 0.070 0.078 0.090 0.093 0.096 0.105 0.119 0.125 0.133 0.139 0.156 0.158 0.165 0.177 0.189 0.198 0.208 0.242 0.248 0.266 0.279 0.319 0.333 0.404 0.424 0.507 0.567 0.861 

6.4 0.040 0.088 0.098 0.112 0.117 0.120 0.132 0.149 0.156 0.167 0.175 0.196 0.198 0.208 0.222 0.237 0.248 0.261 0.304 0.312 0.333 0.350 0.400 0.418 0.507 0.532 0.636 0.711 1.081 

7.6 0.048 0.104 0.117 0.134 0.138 0.142 0.156 0.177 0.186 0.198 0.208 0.233 0.235 0.247 0.264 0.282 0.295 0.309 0.361 0.370 0.396 0.415 0.475 0.497 0.602 0.631 0.755 0.845 1.284 

8.9 0.056 0.122 0.136 0.156 0.162 0.167 0.183 0.208 0.217 0.232 0.243 0.273 0.275 0.289 0.309 0.330 0.345 0.362 0.422 0.433 0.464 0.486 0.557 0.582 0.705 0.739 0.884 0.989 1.503 

10.2 0.064 0.140 0.156 0.179 0.186 0.191 0.210 0.238 0.249 0.266 0.279 0.313 0.315 0.331 0.354 0.378 0.396 0.415 0.484 0.497 0.531 0.557 0.638 0.567 0.808 0.847 1.013 1.133 1.723 

1.5 0.90% 1.98% 2.21% 2.53% 2.62% 2.70% 2.96% 3.36% 3.52% 3.75% 3.93% 4.42% 4.45% 4.67% 5.00% 5.33% 5.59% 5.86% 6.83% 7.01% 7.50% 7.87% 9.01% 9.41% 11.40% 11.96% 14.31% 16.00% 24.32% 

3.8 0.034 0.075 0.084 0.096 0.100 0.102 0.113 0.128 0.134 0.143 0.150 0.168 0.169 0.178 0.190 0.203 0.212 0.223 0.260 0.267 0.285 0.299 0.342 0.358 0.433 0.455 0.544 0.608 0.924 

5.1 0.046 0.101 0.113 0.129 0.134 0.138 0.151 0.171 0.179 0.191 0.201 0.225 0.227 0.238 0.255 0.272 0.285 0.299 0.348 0.358 0.383 0.401 0.459 0.480 0.581 0.610 0.730 0.816 1.204 

6.4 0.058 0.126 0.141 0.162 0.168 0.173 0.190 0.215 0.225 0.240 0.252 0.283 0.285 0.299 0.320 0.341 0.358 0.375 0.437 0.449 0.480 0.504 0.577 0.602 0.730 0.766 0.916 1.024 1.557 

7.6 0.069 0.150 0.168 0.192 0.199 0.205 0.225 0.255 0.267 0.285 0.299 0.336 0.338 0.355 0.380 0.405 0.425 0.446 0.519 0.533 0.570 0.598 0.685 0.715 0.866 0.909 1.087 1.216 1.848 

8.9 0.080 0.176 0.197 0.225 0.233 0.240 0.264 0.299 0.313 0.334 0.350 0.393 0.396 0.416 0.445 0.475 0.497 0.522 0.608 0.624 0.668 0.700 0.802 0.838 1.015 1.065 1.273 1.424 2.165 

10.2 0.092 0.201 0.225 0.258 0.268 0.275 0.302 0.343 0.359 0.383 0.401 0.450 0.454 0.477 0.510 0.544 0.570 0.598 0.697 0.715 0.765 0.803 0.919 0.960 1.163 1.220 1.459 1.632 2.481 

1.8 1.23% 2.69% 3.01% 3.44% 3.57% 3.67% 4.03% 4.57% 4.79% 5.10% 5.36% 6.01% 6.06% 6.36% 6.81% 7.26% 7.61% 7.98% 9.30% 9.55% 10.21% 10.71% 12.26% 12.81% 15.52% 16.28% 19.47% 21.78% 33.10% 

7.6 0.093 0.204 0.228 0.262 0.271 0.279 0.307 0.348 0.364 0.388 0.407 0.457 0.461 0.483 0.517 0.552 0.578 0.607 0.707 0.725 0.776 0.814 0.932 0.974 1.179 1.237 1.480 1.655 2.516 

8.9 0.109 0.239 0.267 0.307 0.318 0.327 0.359 0.407 0.426 0.454 0.477 0.535 0.539 0.566 0.606 0.646 0.677 0.710 0.828 0.850 0.909 0.953 1.091 1.140 1.381 1.449 1.733 1.938 2.946 

10.2 0.125 0.274 0.307 0.351 0.364 0.374 0.411 0.466 0.489 0.521 0.546 0.613 0.618 0.649 0.694 0.741 0.776 0.814 0.949 0.974 1.041 1.093 1.251 1.307 1.583 1.661 1.986 2.222 3.377 

11.4 0.140 0.307 0.343 0.393 0.407 0.418 0.460 0.521 0.546 0.582 0.611 0.685 0.691 0.725 0.776 0.828 0.867 0.910 1.060 1.088 1.164 1.221 1.398 1.461 1.769 1.856 2.220 2.483 3.774 

12.7 0.156 0.341 0.382 0.437 0.453 0.466 0.512 0.581 0.608 0.648 0.680 0.763 0.770 0.808 0.864 0.922 0.966 1.014 1.181 1.212 1.297 1.360 1.557 1.627 1.971 2.068 2.473 2.766 4.204 


www.toro.com 

9



STEP ONE 

Holes per Square Foot 

Holes Per Square Foot 


(Inch) 

All Models 

Forward Spacing (Inches) 

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 6.0 

1.20 120.00 80.00 60.00 48.00 40.00 34.30 30.00 26.70 - 

1.60 - - - 72.00 - - - - - 

2.00 72.00 48.00 36.00 28.80 24.00 - - - - 

2.25 - - - 25.60 - - - - - 

2.40 60.00 40.00 30.00 24.00 20.00 17.10 15.00 13.30 - 

2.50 57.60 38.40 28.80 23.00 19.20 - - - - 

3.20 45.00 30.00 22.50 18.00 15.00 12.90 11.30 10.00 - 

3.50 - - - - 13.71 - - - - 

5.25 - - - - - - - - 4.60 

Percent Of Surface Area Affected And 

STEP TWO Percent Of Surface Area Affected Volume Removed, Cubic Foot 



Core 

Diameter 4.6 10.0 11.3 12.9 13.3 13.7 15.0 17.1 18.0 19.2 20.0 22.5 23.0 24.0 

Depth* 

0.200 0.10% 0.22% 0.25% 0.28% 0.29% 0.30% 0.33% 0.37% 0.39% 0.42% 0.44% 0.49% 0.50% 0.52% 

1.5 0.12 0.27 0.31 0.35 0.36 0.37 0.41 0.47 0.49 0.52 0.55 0.61 0.63 0.65 

2.0 0.17 0.36 0.41 0.47 0.48 0.50 0.55 0.62 0.65 0.70 0.73 0.82 0.84 0.87 

2.5 0.21 0.45 0.51 0.58 0.61 0.62 0.68 0.78 0.82 0.87 0.91 1.02 1.05 1.09 

3.0 0.25 0.55 0.61 0.70 0.73 0.75 0.82 0.93 0.98 1.05 1.09 1.23 1.26 1.31 

3.5 0.29 0.64 0.72 0.82 0.85 0.87 0.95 1.09 1.15 1.22 1.27 1.43 1.47 1.53 

4.0 0.33 0.73 0.82 0.93 0.97 1.00 1.09 1.25 1.31 1.40 1.45 1.64 1.68 1.75 

0.300 0.22% 0.49% 0.55% 0.63% 0.65% 0.67% 0.74% 0.84% 0.88% 0.94% 0.98% 1.10% 1.13% 1.18% 

1.5 0.28 0.61 0.69 0.79 0.82 0.84 0.92 1.05 1.10 1.18 1.23 1.38 1.41 1.47 

2.0 0.37 0.82 0.92 1.05 1.09 1.12 1.23 1.40 1.47 1.57 1.64 1.84 1.88 1.96 

2.5 0.47 1.02 1.15 1.31 1.36 1.40 1.53 1.75 1.84 1.96 2.05 2.30 2.36 2.45 

3.0 0.56 1.23 1.38 1.58 1.64 1.68 1.84 2.10 2.21 2.36 2.45 2.76 2.83 2.95 

3.5 0.65 1.43 1.61 1.84 1.91 1.96 2.15 2.45 2.58 2.75 2.86 3.22 3.30 3.44 

4.0 0.75 1.64 1.84 2.10 2.18 2.24 2.45 2.80 2.95 3.14 3.27 3.68 3.77 3.93 

0.400 0.40% 0.87% 0.98% 1.12% 1.16% 1.20% 1.31% 1.50% 1.57% 1.68% 1.75% 1.96% 2.01% 2.09% 

1.5 0.50 1.09 1.23 1.40 1.45 1.50 1.64 1.87 1.96 2.09 2.18 2.45 2.51 2.62 

2.0 0.66 1.45 1.64 1.87 1.94 1.99 2.18 2.49 2.62 2.79 2.91 3.27 3.35 3.49 

2.5 0.83 1.82 2.05 2.34 2.42 2.49 2.73 3.12 3.27 3.49 3.64 4.09 4.19 4.36 

3.0 1.00 2.18 2.45 2.80 2.91 2.99 3.27 3.74 3.93 4.19 4.36 4.91 5.03 5.24 

3.5 1.16 2.55 2.86 3.27 3.39 3.49 3.82 4.36 4.58 4.89 5.09 5.73 5.86 6.11 

4.0 1.33 2.91 3.27 3.74 3.88 3.99 4.36 4.99 5.24 5.59 5.82 6.54 6.70 6.98 

0.500 0.62% 1.36% 1.53% 1.75% 1.82% 1.87% 2.05% 2.34% 2.45% 2.62% 2.73% 3.07% 3.14% 3.27% 

1.5 0.78 1.70 1.92 2.19 2.27 2.34 2.56 2.92 3.07 3.27 3.41 3.83 3.93 4.09 

2.0 1.04 2.27 2.56 2.92 3.03 3.12 3.41 3.90 4.09 4.36 4.55 5.11 5.24 5.45 

2.5 1.30 2.84 3.20 3.65 3.79 3.90 4.26 4.87 5.11 5.45 5.68 6.39 6.54 6.82 

3.0 1.56 3.41 3.83 4.38 4.55 4.67 5.11 5.84 6.14 6.54 6.82 7.67 7.85 8.18 

3.5 1.82 3.98 4.47 5.11 5.30 5.45 5.97 6.82 7.16 7.64 7.95 8.95 9.16 9.54 

4.0 2.08 4.55 5.11 5.84 6.06 6.23 6.82 7.79 8.18 8.73 9.09 10.23 10.47 10.91 

0.600 0.90% 1.96% 2.21% 2.52% 2.62% 2.69% 2.95% 3.37% 3.53% 3.77% 3.93% 4.42% 4.52% 4.71% 

1.5 1.12 2.45 2.76 3.16 3.27 3.37 3.68 4.21 4.42 4.71 4.91 5.52 5.65 5.89 

2.0 1.50 3.27 3.68 4.21 4.36 4.49 4.91 5.61 5.89 6.28 6.54 7.36 7.54 7.85 

2.5 1.87 4.09 4.60 5.26 5.45 5.61 6.14 7.01 7.36 7.85 8.18 9.20 9.42 9.82 

3.0 2.24 4.91 5.52 6.31 6.54 6.73 7.36 8.41 8.84 9.42 9.82 11.04 11.31 11.78 

3.5 2.62 5.73 6.44 7.36 7.64 7.85 8.59 9.82 10.31 11.00 11.45 12.89 13.19 13.74 

4.0 2.99 6.54 7.36 8.41 8.73 8.98 9.82 11.22 11.78 12.57 13.09 14.73 15.08 15.71 

0.700 1.22% 2.67% 3.01% 3.44% 3.56% 3.67% 4.01% 4.58% 4.81% 5.13% 5.35% 6.01% 6.16% 6.41% 

3.0 3.05 6.68 7.52 8.59 8.91 9.16 10.02 11.45 12.03 12.83 13.36 15.03 15.39 16.04 

3.5 3.56 7.79 8.77 10.02 10.39 10.69 11.69 13.36 14.03 14.97 15.59 17.54 17.96 18.71 

4.0 4.07 8.91 10.02 11.45 11.88 12.22 13.36 15.27 16.04 17.10 17.82 20.04 20.53 21.38 

4.5 4.58 10.02 11.27 12.89 13.36 13.74 15.03 17.18 18.04 19.24 20.04 22.55 23.09 24.05 

5.0 5.09 11.14 12.53 14.32 14.85 15.27 16.70 19.09 20.04 21.38 22.27 25.06 25.66 26.73 

* Tine depth can vary based on machine set-up.

Model Configuration 

Product Description Lateral Forward Spacing Turf Holders 

No. Spacing Options 

Pick A Model 

PN Qty PN Qty 

ProCore 648 Needle Tine Head 09221 1.60 1.5, 2.0, 2.5 105-1110 2 105-1111 1 

Model 09200 Quad Tine Head 09222 1.60 2.5 105-1110 2 105-1111 1 

3 Tine, 3/4" Mount Head 09223 2.50 1.5, 2.0, 2.5, 3.0 105-1106 2 105-1107 1 

4 Tine, 3/4" Mount Head 09224 2.00 1.5, 2.0, 2.5, 3.0 105-1104 2 105-1105 1 

3 Tine, 7/8" Mount Head 09226 2.50 2.0, 2.5, 3.0 105-1106 2 105-1107 1 

660 880 660 880 

ProCore 660/880 Needle Tine Head 660/880 09720 1.20 1.5, 2.0, 2.5 105-5418 6 - 100-5415 1 - 

Models 09701, Needle Tine Head 660/880 09720 1.20 1.5, 2.0, 2.5 105-5419 - 7 - - 

09702 Quad Tine Head 09721 1.20 1.5, 2.0, 2.5 100-5420 1 5 100-5421 8 4 

3 Tine, 3/4" Mount Head 09722 3.20 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 100-5414 2 5 100-5415 3 - 

4 Tine, 3/4" Mount Head 09723 2.40 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 100-5416 5 1 100-5417 - 4 

3 Tine, 7/8" Mount Head 09733 3.20 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 100-5414 2 5 100-5415 3 - 

4 Tine, 7/8" Mount Head 09734 2.40 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 100-5416 5 1 100-5417 - 4 

Toro Greens 

Aerator 

Models 09110, 2.25 2.5 72-4660 RH 1 

09120 72-4680 Ctr 1 

72-4640 LH 1 

Toro Fairway 

Aerator 3.50 3.0, 6.0 70-9440 3 

Models 09500, 5.25 3.0, 6.0 70-9430 3 

09501, 09502 

Amount Of Volume Removed 

Per 1000 Sq. Ft. 

Risk Of Turf Damage 

Higher Risk Of Turf Damage 

25.6 26.7 28.8 30.0 34.3 36.0 38.4 40.0 45.0 48.0 57.6 60.0 72.0 80.0 120.0 

0.56% 0.58% 0.63% 0.65% 0.75% 0.79% 0.84% 0.87% 0.98% 1.05% 1.26% 1.31% 1.57% 1.75% 2.62% 

0.70 0.73 0.79 0.82 0.93 0.98 1.05 1.09 1.23 1.31 1.57 1.64 1.96 2.18 3.27 

0.93 0.97 1.05 1.09 1.25 1.31 1.40 1.45 1.64 1.75 2.09 2.18 2.62 2.91 4.36 

1.16 1.21 1.31 1.36 1.56 1.64 1.75 1.82 2.05 2.18 2.62 2.73 3.27 3.64 5.45 

1.40 1.45 1.57 1.64 1.87 1.96 2.09 2.18 2.45 2.62 3.14 3.27 3.93 4.36 6.54 

1.63 1.70 1.83 1.91 2.18 2.29 2.44 2.55 2.86 3.05 3.67 3.82 4.58 5.09 7.64 

1.86 1.94 2.09 2.18 2.49 2.62 2.79 2.91 3.27 3.49 4.19 4.36 5.24 5.82 8.73 

1.26% 1.31% 1.41% 1.47% 1.68% 1.77% 1.88% 1.96% 2.21% 2.36% 2.83% 2.95% 3.53% 3.93% 5.89% 

1.57 1.64 1.77 1.84 2.10 2.21 2.36 2.45 2.76 2.95 3.53 3.68 4.42 4.91 7.36 

2.09 2.18 2.36 2.45 2.80 2.95 3.14 3.27 3.68 3.93 4.71 4.91 5.89 6.54 9.82 

2.62 2.73 2.95 3.07 3.51 3.68 3.93 4.09 4.60 4.91 5.89 6.14 7.36 8.18 12.27 

3.14 3.27 3.53 3.68 4.21 4.42 4.71 4.91 5.52 5.89 7.07 7.36 8.84 9.82 14.73 

3.67 3.82 4.12 4.30 4.91 5.15 5.50 5.73 6.44 6.87 8.25 8.59 10.31 11.45 17.18 

4.19 4.36 4.71 4.91 5.61 5.89 6.28 6.54 7.36 7.85 9.42 9.82 11.78 13.09 19.63 

2.23% 2.33% 2.51% 2.62% 2.99% 3.14% 3.35% 3.49% 3.93% 4.19% 5.03% 5.24% 6.28% 6.98% 10.47% 

2.79 2.91 3.14 3.27 3.74 3.93 4.19 4.36 4.91 5.24 6.28 6.54 7.85 8.73 13.09 

3.72 3.88 4.19 4.36 4.99 5.24 5.59 5.82 6.54 6.98 8.38 8.73 10.47 11.64 17.45 

4.65 4.85 5.24 5.45 6.23 6.54 6.98 7.27 8.18 8.73 10.47 10.91 13.09 14.54 21.82 

5.59 5.82 6.28 6.54 7.48 7.85 8.38 8.73 9.82 10.47 12.57 13.09 15.71 17.45 26.18 

6.52 6.79 7.33 7.64 8.73 9.16 9.77 10.18 11.45 12.22 14.66 15.27 18.33 20.36 30.54 

7.45 7.76 8.38 8.73 9.97 10.47 11.17 11.64 13.09 13.96 16.76 17.45 20.94 23.27 34.91 

3.49% 3.64% 3.93% 4.09% 4.67% 4.91% 5.24% 5.45% 6.14% 6.54% 7.85% 8.18% 9.82% 10.91% 16.36% 

4.36 4.55 4.91 5.11 5.84 6.14 6.54 6.82 7.67 8.18 9.82 10.23 12.27 13.64 20.45 

5.82 6.06 6.54 6.82 7.79 8.18 8.73 9.09 10.23 10.91 13.09 13.64 16.36 18.18 27.27 

7.27 7.58 8.18 8.52 9.74 10.23 10.91 11.36 12.78 13.64 16.36 17.04 20.45 22.73 34.09 

8.73 9.09 9.82 10.23 11.69 12.27 13.09 13.64 15.34 16.36 19.63 20.45 24.54 27.27 40.91 

10.18 10.61 11.45 11.93 13.64 14.32 15.27 15.91 17.90 19.09 22.91 23.86 28.63 31.82 47.72 

11.64 12.12 13.09 13.64 15.58 16.36 17.45 18.18 20.45 21.82 26.18 27.27 32.72 36.36 54.54 

5.03% 5.24% 5.65% 5.89% 6.73% 7.07% 7.54% 7.85% 8.84% 9.42% 11.31% 11.78% 14.14% 15.71% 23.56% 

6.28 6.54 7.07 7.36 8.41 8.84 9.42 9.82 11.04 11.78 14.14 14.73 17.67 19.63 29.45 

8.38 8.73 9.42 9.82 11.22 11.78 12.57 13.09 14.73 15.71 18.85 19.63 23.56 26.18 39.27 

10.47 10.91 11.78 12.27 14.02 14.73 15.71 16.36 18.41 19.63 23.56 24.54 29.45 32.72 49.09 

12.57 13.09 14.14 14.73 16.83 17.67 18.85 19.63 22.09 23.56 28.27 29.45 35.34 39.27 58.90 

14.66 15.27 16.49 17.18 19.63 20.62 21.99 22.91 25.77 27.49 32.99 34.36 41.23 45.81 68.72 

16.76 17.45 18.85 19.63 22.44 23.56 25.13 26.18 29.45 31.42 37.70 39.27 47.12 52.36 78.54 

6.84% 7.13% 7.70% 8.02% 9.16% 9.62% 10.26% 10.69% 12.03% 12.83% 15.39% 16.04% 19.24% 21.38% 32.07% 

17.10 17.82 19.24 20.04 22.91 24.05 25.66 26.73 30.07 32.07 38.48 40.09 48.11 53.45 80.18 

19.95 20.79 22.45 23.38 26.73 28.06 29.93 31.18 35.08 37.42 44.90 46.77 56.12 62.36 93.54 

22.81 23.76 25.66 26.73 30.54 32.07 34.21 35.63 40.09 42.76 51.31 53.45 64.14 71.27 106.90 

25.66 26.73 28.86 30.07 34.36 36.08 38.48 40.09 45.10 48.11 57.73 60.13 72.16 80.18 120.26 

28.51 29.69 32.07 33.41 38.18 40.09 42.76 44.54 50.11 53.45 64.14 66.81 80.18 89.08 133.63 

www.toro.com 

11

Specifications 

TITAN 

QUAD 

FEATURES & BENEFITS 

• Improved exit quality with chamfered ejection window 

• Optimized end taper for improved core pulling ability 

• Long life with use of 4140 alloy steel 

• Manufacturing heat treatment process 

maximizes durability 

• Multiple sizes offered for today’s practices 

• Coring length available with 12.7 cm (5") options 


Thickness 

108-9104 Titan Quad 1.0 cm (3/8") 11.4 cm (4.50") .5 cm (0.200) .9 cm (0.360) 1.3 mm (0.052") 

108-9105 Titan Quad 1.0 cm (3/8") 11.4 cm (4.50") .8 cm (0.300) 1.2 cm (0.458) 1.4 mm (0.055") 

108-9106 Titan Quad 1.0 cm (3/8") 11.4 cm (4.50") 1.0 cm (0.400) 1.4 cm (0.546) 1.5 mm (0.058") 

108-9108 Titan Quad 1.0 cm (3/8") 12.7 cm (5.00") .5 cm (0.200) .9 cm (0.360) 1.3 mm (0.052") 

108-9109 Titan Quad 1.0 cm (3/8") 12.7 cm (5.00") .8 cm (0.300) 1.2 cm (0.458) 1.4 mm (0.055") 

108-9110 Titan Quad 1.0 cm (3/8") 12.7 cm (5.00") 1.0 cm (0.400) 1.4 cm (0.546) 1.5 mm (0.058") 




12 www.toro.com



TITAN 

MAX QUAD 


SAME GREAT BENEFITS OF TITAN QUAD, PLUS: 

• Sharp chamfer cutting edge optimized for cutting into turf 

• Carbide tip constructed of a tough tungsten carbide blend 

• Improved design and manufacturing process increases the 

ability to pull a better core 

• Durable brazed joint for stronger bond and resistance to 

separation and breakage 

• Consistent carbide coring sizes across all coring tines 

• All carbide tine lengths are consistent 

with non-tipped tines. 

• Durable construction maintains 

aeration depth throughout aeration process 


Thickness 



108-9116 Titan Max Quad 1.0 cm (3/8") 11.4 cm (4.50") 1.0 cm (0.400) 1.5 cm (0.580) 1.5 mm (0.058") 



108-9124 Titan Max Quad 1.0 cm (3/8") 12.7 cm (5.00") 1.0 cm (0.400) 1.5 cm (0.580) 1.5 mm (0.058") 




www.toro.com 

13

Tine 


STEP ONE 

Holes per Square Foot 

All Models 

Forward Spacing (Inches) 

TITAN 

HOLLOW 

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 6.0 

1.20 120.00 80.00 60.00 48.00 40.00 34.30 30.00 26.70 - 

1.60 - - - 72.00 - - - - - 

2.00 72.00 48.00 36.00 28.80 24.00 - - - - 

2.25 - - - 25.60 - - - - - 

2.40 60.00 40.00 30.00 24.00 20.00 17.10 15.00 13.30 - 

2.50 57.60 38.40 28.80 23.00 19.20 - - - - 

3.20 45.00 30.00 22.50 18.00 15.00 12.90 11.30 10.00 - 

3.50 - - - - 13.71 - - - - 

5.25 - - - - - - - - 4.60 

Holes Per Square 


(Inch) 





• Thinner wall for improved hole quality without giving 

up on life 


• Sharp cutting chamfer for improved hole quality 

• Slower wear rate provides more consistent 

aeration depth 

Percent Of Surface Area Affected And 

STEP TWO Percent Of Surface Area Affected Volume Removed, Cubic Foot 



Core 

Diameter 4.6 10.0 11.3 12.9 13.3 13.7 15.0 17.1 18.0 19.2 20.0 22.5 23.0 24.0 

Depth* 

0.200 0.10% 0.22% 0.25% 0.28% 0.29% 0.30% 0.33% 0.37% 0.39% 0.42% 0.44% 0.49% 0.50% 0.52% 

1.5 0.12 0.27 0.31 0.35 0.36 0.37 0.41 0.47 0.49 0.52 0.55 0.61 0.63 0.65 

2.0 0.17 0.36 0.41 0.47 0.48 0.50 0.55 0.62 0.65 0.70 0.73 0.82 0.84 0.87 

2.5 0.21 0.45 0.51 0.58 0.61 0.62 0.68 0.78 0.82 0.87 0.91 1.02 1.05 1.09 

3.0 0.25 0.55 0.61 0.70 0.73 0.75 0.82 0.93 0.98 1.05 1.09 1.23 1.26 1.31 

3.5 0.29 0.64 0.72 0.82 0.85 0.87 0.95 1.09 1.15 1.22 1.27 1.43 1.47 1.53 

4.0 0.33 0.73 0.82 0.93 0.97 1.00 1.09 1.25 1.31 1.40 1.45 1.64 1.68 1.75 

0.300 0.22% 0.49% 0.55% 0.63% 0.65% 0.67% 0.74% 0.84% 0.88% 0.94% 0.98% 1.10% 1.13% 1.18% 

1.5 0.28 0.61 0.69 0.79 0.82 0.84 0.92 1.05 1.10 1.18 1.23 1.38 1.41 1.47 

2.0 0.37 0.82 0.92 1.05 1.09 1.12 1.23 1.40 Thickness 1.47 1.57 1.64 1.84 1.88 1.96 

2.5 0.47 1.02 1.15 1.31 1.36 1.40 1.53 1.75 1.84 1.96 2.05 2.30 2.36 2.45 

3.0 0.56 1.23 1.38 1.58 1.64 1.68 1.84 2.10 2.21 2.36 2.45 2.76 2.83 2.95 

3.5 0.65 1.43 1.61 1.84 1.91 1.96 2.15 2.45 2.58 2.75 2.86 3.22 3.30 3.44 

4.0 0.75 1.64 1.84 2.10 2.18 2.24 2.45 2.80 2.95 3.14 3.27 3.68 3.77 3.93 


108-9128 Titan (Hollow) 1.9 cm (3/4") 12.1 cm (4.75") .8 cm (0.300) 1.2 cm (0.460) 1.4 mm (0.055") 

108-9129 Titan (Hollow) 1.9 cm (3/4") 12.1 cm (4.75") 1.0 cm (0.400) 1.4 cm (0.560) 1.5 mm (0.058") 


0.400 0.40% 0.87% 0.98% 1.12% 1.16% 1.20% 1.31% 1.50% 1.57% 1.68% 1.75% 1.96% 2.01% 2.09% 

1.5 0.50 1.09 1.23 1.40 1.45 1.50 1.64 1.87 1.96 2.09 2.18 2.45 2.51 2.62 

2.0 0.66 1.45 1.64 1.87 1.94 1.99 2.18 2.49 2.62 2.79 2.91 3.27 3.35 3.49 

2.5 0.83 1.82 2.05 2.34 2.42 2.49 2.73 3.12 3.27 3.49 3.64 4.09 4.19 4.36 

3.0 1.00 2.18 2.45 2.80 2.91 2.99 3.27 3.74 3.93 4.19 4.36 4.91 5.03 5.24 

3.5 1.16 2.55 2.86 3.27 3.39 3.49 3.82 4.36 4.58 4.89 5.09 5.73 5.86 6.11 

4.0 1.33 2.91 3.27 3.74 3.88 3.99 4.36 4.99 5.24 5.59 5.82 6.54 6.70 6.98 





0.500 0.62% 1.36% 1.53% 1.75% 1.82% 1.87% 2.05% 2.34% 2.45% 2.62% 2.73% 3.07% 3.14% 3.27% 

1.5 0.78 1.70 1.92 2.19 2.27 2.34 2.56 2.92 3.07 3.27 3.41 3.83 3.93 4.09 

2.0 1.04 2.27 2.56 2.92 3.03 3.12 3.41 3.90 4.09 4.36 4.55 5.11 5.24 5.45 

2.5 1.30 2.84 3.20 3.65 3.79 3.90 4.26 4.87 5.11 5.45 5.68 6.39 6.54 6.82 

3.0 1.56 3.41 3.83 4.38 4.55 4.67 5.11 5.84 6.14 6.54 6.82 7.67 7.85 8.18 

3.5 1.82 3.98 4.47 5.11 5.30 5.45 5.97 6.82 7.16 7.64 7.95 8.95 9.16 9.54 

4.0 2.08 4.55 5.11 5.84 6.06 6.23 6.82 7.79 8.18 8.73 9.09 10.23 10.47 10.91 






0.600 0.90% 1.96% 2.21% 2.52% 2.62% 2.69% 2.95% 3.37% 3.53% 3.77% 3.93% 4.42% 4.52% 4.71% 

1.5 1.12 2.45 2.76 3.16 3.27 3.37 3.68 4.21 4.42 4.71 4.91 5.52 5.65 5.89 


2.0 1.50 3.27 3.68 4.21 4.36 4.49 4.91 5.61 5.89 6.28 6.54 7.36 7.54 7.85 

2.5 1.87 4.09 4.60 5.26 5.45 5.61 6.14 7.01 7.36 7.85 8.18 9.20 9.42 9.82 

3.0 2.24 4.91 5.52 6.31 6.54 6.73 7.36 8.41 8.84 9.42 9.82 11.04 11.31 11.78 

Titan tines fit all current and late model 3.5 Toro ® aerators. 2.62 5.73 6.44 7.36 7.64 7.85 8.59 9.82 10.31 11.00 11.45 12.89 13.19 13.74 

Standard mount size fits most competitor 4.0 equipment. 2.99Check mounting 6.54 size 7.36 to ensure 8.41 compatibility. 8.73 8.98 9.82 11.22 11.78 12.57 13.09 14.73 15.08 15.71 


0.700 1.22% 2.67% 3.01% 3.44% 3.56% 3.67% 4.01% 4.58% 4.81% 5.13% 5.35% 6.01% 6.16% 6.41% 

3.0 3.05 6.68 7.52 8.59 8.91 9.16 10.02 11.45 12.03 12.83 13.36 15.03 15.39 16.04 

3.5 3.56 7.79 8.77 10.02 10.39 10.69 11.69 13.36 14.03 14.97 15.59 17.54 17.96 18.71 

4.0 4.07 8.91 10.02 11.45 11.88 12.22 13.36 15.27 16.04 17.10 17.82 20.04 20.53 21.38 

4.5 4.58 10.02 11.27 12.89 13.36 13.74 15.03 17.18 18.04 19.24 20.04 22.55 23.09 24.05 

5.0 5.09 11.14 12.53 14.32 14.85 15.27 16.70 19.09 20.04 21.38 22.27 25.06 25.66 26.73 

14 


www.toro.com



TITAN 

MAX HOLLOW 


SAME GREAT BENEFITS OF TITAN HOLLOW, PLUS: 

Amount Of Volume Removed 


Per 1000 Sq. Ft. 

Risk Of Turf Damage 








Higher Risk Of Turf Damage 


• Durable construction maintains aeration 

depth throughout aeration process 

25.6 26.7 28.8 30.0 34.3 36.0 38.4 40.0 45.0 48.0 57.6 60.0 72.0 80.0 120.0 


Thickness 

108-9139 Titan Max (Hollow) 1.9 cm (3/4") 12.1 cm (4.75") .8 cm (0.300) 1.2 cm (0.480) 1.4 mm (0.055") 

108-9141 Titan Max (Hollow) 1.9 cm (3/4") 12.1 cm (4.75") 1.0 cm (0.400) 1.5 cm (0.580) 1.5 mm (0.058") 













www.toro.com 15


TITAN 

SIDE-EJECT 






up on life 





• Improved ejection window design prevents plugging 


Thickness 

108-9159 Titan (Side Eject) 1.9 cm (3/4") 12.1 cm (4.75") .8 cm (0.300) 1.2 cm (0.460) 1.4 mm (0.055") 

108-9160 Titan (Side Eject) 1.9 cm (3/4") 12.1 cm (4.75") 1.0 cm (0.400) 1.4 cm (0.560) 1.5 mm (0.058") 















16 www.toro.com



TITAN 

MAX SIDE-EJECT 


SAME GREAT BENEFITS OF TITAN SIDE-EJECT, PLUS: 










• Durable construction maintains aeration 

depth throughout aeration process 


Thickness 

108-9170 Titan Max (Side Eject) 1.9 cm (3/4") 12.1 cm (4.75") .8 cm (0.300) 1.2 cm (0.480) 1.4 mm (0.055") 

108-9172 Titan Max (Side Eject) 1.9 cm (3/4") 12.1 cm (4.75") 1.0 cm (0.400) 1.5 cm (0.580) 1.5 mm (0.058") 













www.toro.com 

17


TITAN 

FAIRWAY 






up on life 





• Improved ejection window design prevents plugging 


Thickness 












18 www.toro.com



TITAN MAX FAIRWAY 


SAME GREAT BENEFITS OF TITAN FAIRWAY, PLUS: 










• Durable construction maintains 

aeration depth throughout aeration 

process 


Thickness 








www.toro.com 

19


TITAN 

SOLID NEEDLE 

AND SOLID ROUND 


• Multiple sizes and longer lengths available 

• Tip designed to stay sharper longer 

• 1.6 mm (1/16") flat tip improves handling comfort when 

installing tines. 

• Long life with use of alloy steel and improved heat 

treat process 


Thickness 

100-3620 Titan Solid Needle N/A 16.3 cm (6.43") N/A 5mm N/A 

100-3621 Titan Solid Needle N/A 18.7 cm (7.38") N/A 8mm N/A 

108-9230 Titan Solid Round 1.0 cm (3/8") 11.4 cm (4.50") N/A .5 cm (.200) N/A 












108-9201 Titan Solid Round 1.9 cm (3/4") 11.4 cm (4.50") N/A 1.0 cm (.400) N/A 





20 www.toro.com



TITAN 

SOLID ROUND 

AND SPOON 







treat process 


Thickness 













01-283-0060 Spoon Tines-1.9 cm (3/4") N/A N/A N/A N/A N/A 

01-283-0080 Spoon Tines -1.9 cm (3/4") N/A N/A N/A N/A N/A 






www.toro.com 

21


TITAN 

SOLID CROSS 






• Maximum air infiltration with minimum disturbance 

over round tines 


treat process 


Thickness 

108-9215 Titan Solid Cross 1.0 cm (3/8") 11.4 cm (4.50") N/A 1.0 cm (.375) N/A 


















22 www.toro.com



TITAN 

SOLID SLICING 






• Maximum air infiltration with minimum disturbance 

over round tines 


treat process 


Thickness 

108-9238 Titan Solid Slicing 1.0 cm (3/8") 12.7 cm (5.00") N/A 1.6 cm (.625) N/A 







www.toro.com 

23


CLASSIC TORO® FAIRWAY 

TINES 


• Durable construction 

• Thicker wall design 

• Side-Eject window prevents plugging 

• Multiple sizes and longer length available 

• Variety of mount sizes to fit late model equipment 


Thickness 

104-9875 Fairway (Side Eject) 1.0 cm (3/4") 14.6 cm (5.75") 1.5 cm (0.600) N/A 3.1 mm (0.122") 





71-0940 Fairway (Side Eject) 2.5 cm (1") 17.8 cm (7.00") 1.7 cm (0.650) N/A 2.1 mm (0.083") 




24 www.toro.com

Can you find what’s missing from this picture? 

Introducing the Toro ® ProCore ® 648. 

Its unique design places the 

wheels inside the aeration path. So 

you won’t see tire marks, ruts or 

smashed cores. And you won’t see 

all the extra work.To find out more, 

visit www.toro.com/procore648.

TINES FULL-LINE CATALOG 

Products depicted in this brochure are for demonstration 

purposes only. Actual products offered for sale may vary. 

©2005 The Toro Company. All rights reserved. 

Printed in the U.S.A. Form No. 200-2833

Intl Titan Tines Catalog - Toro

Create successful ePaper yourself

Delete template?

Save as template?